X-Plus XP-907 Micro-USB cable.

Overview

The X-Plus XP-907 Micro-USB Cable (1 Meter, 6A Fast Charge) is a heavy-duty, ultra-flexible charging and data cable engineered with a premium 100% liquid silicone gel jacket. Designed to solve the chronic breakage, stiffening, and contact degradation of cheap plastic cables, the XP-907 stays silky smooth, tangle-free, and flexible under any condition. Internally fortified with thick tinned-copper conductors, it supports high current throughput up to 6A alongside stable 480 Mbps high-speed data transmission. Whether you are flashing firmware onto an ESP8266/ESP32, powering an Arduino Leonardo, or charging smartphones and power banks, the XP-907 provides unbreakable performance on your electronics workbench.

Key Features

• 100% Premium Liquid Silicone Jacket: Delivers a luxuriously soft, silky touch that completely resists knotting, tangling, and cracking over time.
• Supports Heavy 6A Fast Charging: Thick power gauge conductors minimize voltage drop, delivering peak charging speeds to high-drain devices and development boards.
• Full High-Speed Data Sync (480 Mbps): High-integrity data shielding guarantees glitch-free bootloader flashing and serial communication with microcontrollers.
• Flame-Retardant & Heat Resistant: Silicone insulation safely withstands hot soldering iron tip touches and extreme workshop temperatures without melting.
• Heavy-Duty Strain Relief: Reinforced flexible TPE connector collars withstand severe pulling, twisting, and over 20,000 bending cycles.
• Universal Micro-USB Fit: Snug, precision-molded gold-plated connector contacts eliminate loose connections and intermittent serial dropouts.

Technical Specifications

• Model Designation: X-Plus XP-907
• Interface: USB Type-A Male to Micro-USB Male
• Length: 100 cm (1 Meter)
• Current Capacity: Up to 6A Max
• Data Speed: USB 2.0 (Up to 480 Mbps)
• Outer Material: Flame-retardant liquid silicone rubber
• Core Conductors: Pure tinned oxygen-free copper
• Tensile Strength: High pull resistance (>15 kg)
• Color: Premium bright finish

Applications & Use Cases

• Microcontroller Programming: Flashing firmware via Arduino IDE to NodeMCU ESP8266, ESP32 Micro-B, Arduino Nano (Micro-USB), and Teensy boards.
• Single-Board Computer Powering: Supplying stable, low-drop 5V power to Raspberry Pi 3B+ and Raspberry Pi Zero nodes.
• Mobile Device Fast Charging: Rapid charging for smartphones, Bluetooth audio receivers, flashlights, and power banks.
• Electronics Field Kits: Durable cable that coils tightly into toolboxes without developing permanent kinks or stiff bends.

What's Included

• 1 × X-Plus XP-907 Liquid Silicone Micro-USB Cable (1 Meter)

Compatibility

• Microcontrollers & Boards: Compatible with all Micro-USB boards (ESP8266 NodeMCU, ESP32, Arduino Leonardo, Arduino Pro Micro, STM32 Blue Pill).
• Chargers: Fully compatible with Quick Charge 3.0, VOOC, AFC, and standard 5V/9V USB-A power adapters.

MOKWN Recommendation

Every maker knows the nightmare of a bad USB cable causing intermittent "Device Disconnected" errors right in the middle of uploading code to an ESP32 or Arduino. The X-Plus XP-907 uses real data wires and thick copper cores that ensure your COM port never drops out. Its silicone jacket won't melt even if your soldering iron accidentally touches it. A reliable cable you can trust on your lab bench—get yours from MOKWN today with fast shipping across Egypt!